Many prescriptions are not written as “one tablet a day.” Your label might say “take one-half tablet every morning” or “take 1½ tablets twice daily.” Those instructions are perfectly normal, but they make the usual supply math easy to get wrong. If you count tablets when you should be counting doses, you will either run out early or refill far too soon.
This guide shows how to calculate how long a bottle lasts when you split tablets, how to handle awkward fractions and alternating schedules, and how to plan refills so a split-dose routine never leaves you short.
Why split doses change the math
A bottle of 30 tablets is a 30-day supply only if you take one tablet a day. If you take half a tablet a day, the same bottle lasts twice as long. If you take one and a half tablets a day, it lasts only 20 days. The pharmacy’s “days’ supply” field on your label is calculated from the quantity dispensed and the directions, so it should reflect the split. If the number printed on your label does not match your own calculation, that is worth a quick question to the pharmacist.
The key idea is to work in a single consistent unit. Either count whole tablets or count doses, but do not mix the two partway through.
The core formulas
There are two equivalent ways to do the calculation. Pick the one that feels more natural.
Method 1: tablets per day
- Work out how many whole tablets you use per day. Half a tablet once a day is 0.5. Half a tablet twice a day is 1. One and a half tablets twice a day is 3.
- Divide the tablets you have by tablets used per day.
Days of supply = tablets on hand ÷ tablets used per day
Method 2: counting doses
- Multiply the tablets on hand by the number of doses each tablet provides (a tablet split in half provides 2 doses).
- Divide by the number of doses you take per day.
Days of supply = (tablets on hand × doses per tablet) ÷ doses per day
Both give the same answer. Method 2 is helpful when the tablet is split into halves or quarters, because it keeps the numbers whole.
Worked examples
Example 1: half a tablet once a day
You have 30 tablets and take half a tablet each morning.
- Tablets used per day: 0.5
- Days of supply: 30 ÷ 0.5 = 60 days
Using Method 2: 30 tablets × 2 doses per tablet = 60 doses, and you take 1 dose per day, so 60 ÷ 1 = 60 days. Same result.
Example 2: one and a half tablets a day
You have 90 tablets and take 1½ tablets daily.
- Days of supply: 90 ÷ 1.5 = 60 days
A quick sanity check: two days use 3 tablets, so 90 tablets is 30 two-day blocks, which is 60 days.
Example 3: half a tablet twice a day
You have 60 tablets and take half a tablet in the morning and half in the evening.
- Tablets used per day: 0.5 + 0.5 = 1
- Days of supply: 60 ÷ 1 = 60 days
Notice that even though you split every tablet, the daily total is one whole tablet, so the tablet count equals the day count.
Example 4: a larger daily amount and rounding
You have 45 tablets and take 1½ tablets twice a day.
- Tablets used per day: 1.5 × 2 = 3
- Days of supply: 45 ÷ 3 = 15 days
When the answer is not a whole number, round down for planning. For instance, 50 tablets at 3 per day is 16.67 days, so plan on 16 full days and treat the remainder as a partial day, not a spare day.
Example 5: alternating-day schedules
Some directions alternate amounts, such as “take one tablet on Monday, Wednesday and Friday and half a tablet on the other days.” Add the tablets used across one full week, then divide.
- Monday, Wednesday, Friday: 3 × 1 = 3 tablets
- Other four days: 4 × 0.5 = 2 tablets
- Weekly total: 5 tablets, or about 0.714 per day
With 70 tablets: 70 ÷ 5 = 14 weeks, which is 98 days. For any repeating pattern, the shortcut is the same: total the tablets for one complete cycle, divide the supply by that cycle total, and multiply by the cycle length.
Turning days of supply into a run-out date
Knowing the number of days is only half the job. You also need the date. Count the first day you take a dose as day 1, so the last day of the supply is the start date plus (days − 1).
Say you begin a new bottle on November 1 and calculated 60 days of supply. Day 1 is November 1, day 30 is November 30, and day 60 is December 30. Your last dose from that bottle is on December 30, and you need the next supply in hand by December 31.
Most people want a buffer rather than an exact run-out date. If you aim to have the refill ready about five to seven days before the last dose, the target in this example would be around December 23 to 25. Your pharmacy and insurance plan decide the earliest date a refill can be filled, which may differ from the date you would prefer. Our guide to what “refill too soon” means and how to avoid it explains how that window works.
If you would rather skip the arithmetic, enter your start date, tablet count and daily amount into the refill date calculator and it will show the run-out date for you.
What about tablets that crumble or are lost?
Splitting is not always clean. Some tablets crumble, break unevenly, or are scored on one side only. A few practical points:
- Count usable halves, not whole tablets. If three tablets out of 60 break apart and cannot be used (a hypothetical case), you have 57 usable tablets. At half a tablet per day, that is 57 × 2 = 114 doses, not 120.
- Do not split a tablet unless you have been told it is safe to. According to the FDA’s page on tablet splitting, you should always talk to your healthcare professional before splitting a tablet, most sustained, controlled or timed-release medications are not meant for splitting, and if a tablet is FDA-approved to be split, that information is printed in its label. Your pharmacist is the right person to ask about your exact product.
- Ask about a pill splitter. A pharmacy can often split tablets for you or recommend a splitter, which tends to give more even halves than a knife or fingers.
- Keep unused halves safe. Store leftover halves as the pharmacist advises, and use them first at the next dose so nothing is wasted.
Common mistakes to avoid
- Counting tablets as if they were days. With a half-tablet routine, 30 tablets is not 30 days. Always divide by the daily amount.
- Forgetting that more than one dose a day adds up. Half a tablet three times a day is 1.5 tablets per day, not 0.5.
- Mixing strengths. If your dose changes (say, from 10 mg tablets to 5 mg tablets), recalculate with the new tablet count and amount, and do not carry over old numbers. For liquid forms, a separate conversion is needed; our mg to mL conversion guide walks through it, and the liquid dosage calculator estimates how long a bottle will last.
- Forgetting the leftover supply. If you already have tablets at home from a previous fill, add them to your count. Our step-by-step article on how many pills you should have left covers the reverse calculation when you want to check your count against your start date.
- Using the wrong days’ supply. A prescription written for “½ tablet daily” with a quantity of 30 lasts 60 days by simple arithmetic. Ask the pharmacy to check how the days’ supply was entered on your label.
Writing split-dose directions clearly
Clear directions protect you from errors. If your doctor wants you to take half a tablet, the prescription should say so explicitly (for example, “take ½ tablet by mouth once daily”) and the quantity should match the plan. Sometimes a different tablet strength removes the need for splitting entirely. If a lower-strength tablet exists and you currently take half of a higher-strength one, ask your prescriber whether the lower strength is available and appropriate. This is a conversation to have with your prescriber, not a change to make on your own.
Planning bigger supplies
Half-tablet routines pair well with longer fills. A 90-day fill at half a tablet daily would only require 45 tablets, so make sure the quantity written matches the days you want. Our comparison of 90-day versus 30-day supplies discusses when longer fills make sense and the trade-offs. For a quick look-up of common quantities and daily amounts, the quantity and dose chart is a handy companion to the formulas above. For general 30-day math with whole tablets, see how to calculate a 30-day prescription supply.
Quick checklist
- Convert your daily amount into whole tablets (0.5, 1, 1.5 and so on).
- Divide tablets on hand by tablets per day.
- Round down to whole days for planning.
- Count day 1 as the day you start, and add days − 1 to find the last day.
- Re-check the numbers every time the strength, directions or quantity changes.
- Confirm with the pharmacist that the label’s days’ supply matches your calculation.
Medical disclaimer
This article provides general information about calculating medication supply and is not medical advice. Do not split, crush or change how you take any medication unless your prescriber or pharmacist has told you it is safe for your specific product. Always follow the directions on your prescription label, and talk to your doctor or pharmacist before making any change to your dose or schedule. If you are unsure how many tablets you should be taking, contact your pharmacist.