A 90 day supply sounds simple: three months of medicine in one bottle. In practice the number of tablets in that bottle depends entirely on how you take it. Someone taking one tablet a day needs 90 tablets. Someone taking two tablets twice a day needs 360. The label on your bottle should show the days’ supply, but it helps to be able to check the math yourself, especially when you are comparing a 30 day fill with a 90 day fill, planning a trip, or trying to work out when your next refill is due.
This guide walks through the formula, the date calculation, the common mistakes, and a handful of worked examples. You can follow along by hand or use the free 90 day supply calculator to check each answer.
The basic formula
For a start-date estimate, the refill date calculator’s worked calendar examples show how a fixed number of covered days crosses month boundaries.
Everything starts with one equation:
Tablets needed = tablets per dose × doses per day × days of supply
Each piece is simple on its own:
- Tablets per dose is how many tablets you take at one time. It can be a fraction, such as 0.5 for half a tablet.
- Doses per day is how many times you take it in a day.
- Days of supply is the length of time the supply must cover, such as 30, 60 or 90.
If you multiply the first two numbers you get your daily use. Multiply that by the number of days and you have the total tablet count.
Worked examples for common schedules
Example 1: one tablet once a day. 1 × 1 × 90 = 90 tablets. A bottle of 90 is exactly one 90 day supply.
Example 2: one tablet twice a day. 1 × 2 × 90 = 180 tablets. A bottle of 90 would last only 45 days.
Example 3: two tablets once a day. 2 × 1 × 90 = 180 tablets.
Example 4: half a tablet once a day. 0.5 × 1 × 90 = 45 tablets. A bottle of 90 would last 180 days, which is why you should always check the quantity and directions together. If you split tablets regularly, our guide to half-tablet dosing covers awkward fractions and what to do about the odd leftover half.
Example 5: one and a half tablets three times a day. 1.5 × 3 × 90 = 405 tablets.
Example 6: a schedule that changes. Some directions change partway through. Suppose you take one tablet daily for the first 30 days and two tablets daily for the next 60 days. Calculate each stretch separately and add them: (1 × 1 × 30) + (2 × 1 × 60) = 30 + 120 = 150 tablets. Do not average the doses; calculate each phase on its own.
Going the other way: how long will the tablets last?
Sometimes you already have a bottle and want to know how many days it covers. Rearrange the formula:
Days of supply = tablets on hand ÷ (tablets per dose × doses per day)
For example, a bottle of 120 tablets taken as one tablet twice a day gives 120 ÷ 2 = 60 days. A bottle of 100 tablets taken as 1.5 tablets once a day gives 100 ÷ 1.5 = 66.67, which you should round down to 66 full days because you cannot cover a partial day with a leftover fraction of a dose. Always round down when estimating how long a supply will last, and round up when estimating how many tablets you need. That way any rounding error keeps you on the safe side.
For a quick lookup without doing division, the quantity and dose chart lists common combinations.
Turning days into dates
A tablet count is only half the job. You also need to know the calendar date the supply runs out. The rule is:
Run-out date = first day you take the medicine + days of supply
Many people forget to decide whether the first day counts. If you take your first dose on January 1 and have exactly 90 days of supply, your last dose falls on March 31 in a non-leap year, and the first day you have nothing left is April 1. Adding 90 days to January 1 lands on April 1, which is the day you would need the next supply in hand. Counting this way keeps you from running a day short.
Months have different lengths, so do not simply add three months. Ninety days from the same start date can be a different calendar date depending on which months are crossed. Using a calculator for the date arithmetic removes this source of error. If you want the full exact run-out date for a prescription fill, use the refill date calculator on the homepage.
Planning the refill, not just the run-out date
The run-out date is not the same as the date you should request the refill. Pharmacies need time to prepare the medicine, prescribers sometimes need to approve renewals, and holidays or weekends can add delays. A common habit is to plan the next request about a week before the supply ends. In the 90 day calculator we show a suggested planning date seven days before the run-out date, but this is only a convenient buffer, not a rule.
Insurance plans and pharmacies often have their own rules about how early a refill can be requested. If you request too early the claim can be rejected. Our article on refilling too soon explains what that message means and how to avoid it. Your pharmacist can tell you the exact window that applies to your plan.
Common mistakes to avoid
Mixing up tablets and doses. If you take two tablets per dose, three times a day, that is six tablets per day, not three. Write down tablets per dose and doses per day as two separate numbers before multiplying.
Forgetting about split tablets. A bottle of 30 tablets is a 60 day supply when you take half a tablet daily. Always match the quantity to the directions.
Ignoring “as needed” schedules. If a medicine is taken only when needed, you cannot calculate a fixed day count with certainty. Use the maximum your directions allow if you want a worst-case estimate, and ask your pharmacist how the days’ supply on your label was determined.
Using the wrong start date. If you are still finishing the previous bottle, your new supply starts when the old one runs out, not on the day you pick it up. Add the leftover tablets to the new bottle’s count when estimating the run-out date.
Assuming every month is 30 days. A 28 day cycle, a 30 day cycle and a calendar month all differ slightly. See why pharmacy cycles differ for more on how this causes refills to drift earlier or later.
Putting it all together: a full example
Imagine you take one tablet in the morning and one at night, starting on a Monday. You are about to fill a 90 day supply.
- Tablets per dose is 1 and doses per day is 2, so daily use is 2 tablets.
- For 90 days you need 2 × 90 = 180 tablets.
- The bottle should contain 180 tablets. If the pharmacy gives you 120 tablets, that is only 120 ÷ 2 = 60 days.
- If the first dose is on a given date, add 90 days to find the run-out date.
- Plan the refill request about a week before that date, and confirm the timing rules with your pharmacy.
Now suppose you already have 24 tablets left from the previous fill. Those cover 24 ÷ 2 = 12 days. Your new bottle starts 12 days after today, so the run-out date moves 12 days later. The 90 day calculator has an optional field for tablets you already have, which does this adjustment for you.
Is a 90 day supply right for you?
Whether to ask for a 90 day fill is a decision for you, your prescriber and your insurance plan. Your prescriber and pharmacist can tell you which fill length is available and suitable for you. Our comparison of a 90 day supply vs a 30 day supply lays out the practical trade-offs. Planning to travel? A longer fill can make packing easier, and the travel medicine supply calculator helps you work out how much to bring.
Quick checklist before you refill
- Write down tablets per dose and doses per day.
- Multiply to get daily use, then multiply by the days you need to cover.
- Compare the result with the quantity printed on the label.
- Add any leftover tablets before you work out the run-out date.
- Choose a refill request date a few days ahead of the run-out date.
- Ask your pharmacist if the numbers on the label do not match your own.
Frequently asked questions
Is a 90 day supply always 90 tablets? No. The tablet count depends on how you take the medicine. One tablet daily is 90 tablets, but two tablets daily is 180.
What if my dose changes during the 90 days? Calculate each period separately and add the totals together, as in Example 6 above.
Should I round up or down? Round up when working out how many tablets you need, and round down when working out how many days a bottle will last.
Can I use this math for liquids? The same idea applies, but you divide the bottle volume by the daily volume used. For bottles of syrup or drops, use the liquid dosage calculator instead.
Medical disclaimer
This article is general information about doing supply arithmetic and is not medical advice. It does not tell you how much medicine to take or whether a particular fill length is right for you. Always follow the directions on your prescription label, and ask your doctor or pharmacist about dosing, refill timing and insurance rules that apply to your situation.